Sam Posted May 17, 2017 Share Posted May 17, 2017 https://youtu.be/VtJdd2LKc6U?t=71 https://youtu.be/U2gOBas2u7s?t=13 Any hints or tips where to start with emulating this sound in Ableton? And- if it's not too much to ask* - a little bit of background knowledge would be sweet.....i've never really had to put a name to this sound until this post, but to me it would be a kind standard acid lead with delay on it? Where would I find some early instances of it, and how would it have been initially achieved? 303 with glide on the pitch, and delay? Any help much appreciated :) Link to comment Share on other sites More sharing options...
Nil Posted May 17, 2017 Share Posted May 17, 2017 Any monophonic subtractive synth that lets you route a square or sawtooth wave (or a mix of both) oscillator into a 18dB/octave or 24dB/oct. LPF (with nice amount of resonance) and pitch glide could indeed do the trick here. Add some delay from the get go when you patch your synth et voilà. Remember that the less you drive the LPF, the more headroom it has to sing. Don't neglect the MIDI sequence, the way notes overlap etc... And of course, sets the enveloppes to taste. It could indeed be a 303 (or a 101/202) but I'd say that the delay is at least as crucial here as the synth itself. Link to comment Share on other sites More sharing options...
auxien Posted May 17, 2017 Share Posted May 17, 2017 Analog device might be your best bet in Ableton. Tips above are great and can be achieved with Analog. Link to comment Share on other sites More sharing options...
Sam Posted May 17, 2017 Author Share Posted May 17, 2017 Absolutely awesome stuff lads. Thanks so much! Gonna get stuck in :) Here have some Mark Broom Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.