TheBro Posted November 19, 2018 Share Posted November 19, 2018 Hi guys what Case would you recommend for the Korg Volca keys/bass/beats etc? I see there's this https://www.amazon.co.uk/UDG-Creator-Volca-Hardcase-U8435BL/dp/B016MN0SHI/ref=sr_1_1?ie=UTF8&qid=1542631481&sr=8-1&keywords=volca+case apparently its a very tight fit which I don't whether that's bad or good. And then there's this https://www.amazon.co.uk/DURAGADGET-Black-Fully-Customizable-Shock-Absorbing-Interior/dp/B01BKQZ3IG/ref=sr_1_3?ie=UTF8&qid=1542631481&sr=8-3&keywords=volca+case What do you use / recommend? Thanks Link to comment Share on other sites More sharing options...
th555 Posted November 19, 2018 Share Posted November 19, 2018 Been meaning to pick up this from the company Decksaver: It's only for the buttons but that's all you really need I'd think. Link to comment Share on other sites More sharing options...
TheBro Posted November 19, 2018 Author Share Posted November 19, 2018 Thanks th555. Interesting. I want something that I can either put into my rucksack or for it to be carried independently. There are quite a few choices just gotta get the right thing otherwise its £20 down the drain!! Link to comment Share on other sites More sharing options...
Entorwellian Posted November 21, 2018 Share Posted November 21, 2018 https://kvgear.com/ Link to comment Share on other sites More sharing options...
TubularCorporation Posted November 23, 2018 Share Posted November 23, 2018 For something the size of a Volca you can get a REALLY nice Monoprice hard case for under $20 USD https://www.monoprice.com/category?c_id=117&cp_id=11703&cs_id=1170305 I've been using these for a few years. I've had a couple actual name brand Pelican cases (secondhand) over the years and there's no noticeable difference in quality. I swear by these things. Only down side is the foam inserts are a little softer than I'd like. For a small piece like the Volca that's not an issue, for the Octatrack I glued the foam pieces together with contact cement and then glued felt around the sides of the hole where the OT sits, which seems to be more than enough to keep the foam from compressing if the OT is in the case for a while. I kept my x0xb0x (which is a bit heavier than a Volca) in one for over a year while I wasn't using it and the foam didn't compress at all. Absolutely rock solid and waterproof, miles better than the dedicated Volca cases I've seen. You could hit it off the side of a boat into the ocean with a baseball bat and then fish it out and whatever is inside will be fine. This one should be big enough to hold a Volca plus a power supply. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.